CellarPro AH12S Series, Manual

Page: 22 / 33

V12.21
22
"Auto" runs the humidifier automatically based on the set-point, "Off" turns the humidifier off. To turn the humidifier
off, press the
“System” button until the following screen is shown:
To set the humidifier to “Auto”, press the “System” button until the following screen is shown:
Pressing the "Up" or "Down" arrows will
cause the display to change and the
current set point value to blink. Use the
arrows to increase or decrease the
humidity set point to the desired value.
The display will return to the normal
display mode after a few seconds,
showing the current relative humidity.