- 20 -
Enter Programming Mode 2 and configure Standby Mode Setting as the following table:
Enter Programming Mode 2 and configure B4 Flash Setting as the following table:
#
Indicator Light
Description
4
1
3
B4 Flash Setting
Under Programming Mode 2, you can change the flash mode of B4 under Standby Mode by
B2 Setting.
#
Indicator Light
Description
Set flashing red backlight of B4 to ON (under Standby Mode).
2
Set flashing red backlight of B4 to OFF (under Standby Mode).
Standby Mode Setting
Under Programming Mode 2, you can change the entry conditions of Standby Mode by B1
Setting.
Automatically enter Standby Mode after 1 minute if no
buttons are activated and Input 1 is not activated.
Manually enter Standby Mode by pressing B4 for more
than 1 second.
Automatically enter Standby Mode after 15 minutes if no
buttons are activated and Input 1 is not activated.
Manually enter Standby Mode by pressing B4 for more
than 1 second.
Automatically enter Standby Mode after 15 minutes if no
buttons are activated and Input 1 is not activated.
Manually turn off all button functions by pressing B4 for
more than 1 second first. The red backlight of B4 blinks for
20 seconds and then automatically enter Standby Mode.
Automatically enter Standby Mode after 1 minute if no
buttons are activated and Input 1 is not activated.
Manually turn off all button functions by pressing B4 for
more than 1 second first. The red backlight of B4 blinks for
20 seconds and then automatically enter Standby Mode.
2
★
default
1
★
default
