-
The excess portion of the propeller shaft can cut in two sides.
-
The propeller shaft parts are combined again removed from the vise.
-
Please make the attaching chain connection to propeller shaft.
-
Slip portion of the propeller shaft (large side) would be attached to the machine and
other side would be attached to the tractor.
-
Make sure it is seated to the propeller shaft pin milling channel.
HYDRAULIC
Two dual-action hydraulic outlets with ISO standard compliant couplings are required to
operate the feed mixer.
The hydraulic couplings will be connected to the tractor normally with the system
unpressurized.
To ensure that the system is unpressurized before disconnecting the hoses, move the valve
control levers to their most extreme positions when the tractors power switched off, so any
eventual pressure from the hydraulic system is allowed to return to the tractor oil tank.
