background image

1

The purpose of these operating instructions is to familiarise you with the ope-
ration of this product. Therefore, keep these instructions in a safe place so that 
you can refer to them at any time.

• 

Do not connect the units until you have read and understood the complete opera-

ting instructions.

• 

Remove the product from its packaging and remove all packaging materials. Make 

sure that there is no packaging material on or in the product. If you notice any da-

mage to the packaging, also check whether there is any damage to the product. 

If you notice any external damage to the unit or any unexpected or unusual fun-

ctioning, do not continue to use the product. Contact the dealer from whom you 

purchased the product or celexon directly (Web: www.celexon.co.uk, Mail: info@

celexon.co.uk) for further information.

• 

To ensure trouble-free operation, the product must only be used indoors. It is NOT 

suitable for outdoor use. 

• 

Always place the transmitter and receiver on a flat surface.

• 

The transmitter and receiver switch to standby mode when not in use. If the units 

are not to be used for a long period of time, disconnect them completely from the 

power supply.

• 

The use of the appliance and accessories is prohibited for children under 16 years 

of age.

• 

Ensure that children do not play with the appliance or stay in the vicinity without 

supervision.

• 

Conversion or modification of the product impairs product safety.

• 

Caution: Risk of injury!

 Never disassemble the product yourself. Never carry out 

repairs yourself!

• 

Do not use the product near gas or water appliances, in a dusty environment or on/

near metallic surfaces (reception interference).

• 

Handle the product with care. It can be damaged by knocks, blows or falling from 

even a small height.

• 

Keep the product away from moisture and heat.

• 

Never immerse the product in water or other liquids.

• 

Use the product only in its intended manner. Any use for any other purpose may 

damage the product or its environment.

• 

All supply lines and cables must not be subjected to additional loads and must be 

laid in such a way that they are not damaged or crushed.

WARNINGS

Summary of Contents for WHD30M-4K












Reviews: