3
Installation instructions
1.
Frame assembly
Place the frame segments with the tensioning fixtures/springs facing downwards
onto a clean cloth to avoid any scratching of the frame. Connect the upper and
lower frame parts with the corners to create a rectangle.
2.
Fabric assembly
Please ensure that the corner covers are fitted tightly over the corners of the frame
when glued on so that there are no folds or wrinkles in the fabric (see fig 1).
Spread the fabric out (observe correct side – see green sticker ‘projection side’
facing downwards) onto the cloth to avoid any damage. Slide the galvanized rods
into the pockets of the screen fabric and position the frame centrally onto the fabric
and wrap the fabric around the frame.
In order to tension the fabric, pull the tensioning straps (C) through the holes and
hook them onto the respective fastening pin (fig 2). Attach them consecutively,
starting in the corners and continue to attach the whole fabric.
If the fabric has a seam (only larger screens), please ensure that it is positioned in
the top section of the viewing area as it will be less noticeable.
3.
Wall mounting
The celexon Expert PureWhite screen is provided with adjustable mounting brackets
(B) to allow flexibility. To attach the screen, please use the screws and wall plugs (E / F)
provided.
The screens comes with a safety bracket (centre of bottom frame) to ensure the
screen is completely square and to ensure safety.
The manufacturer can only ensure that the screen is installed completely square if all
mounting brackets at the top and bottom are correctly attached. If other mounting
brackets/methods are used, this cannot be guaranteed.
During installation, please check horizontal alignment with a spirit level.
4
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
