Option 1:
1. Connect the device to a computer with the included USB cable.
2. Connect the power cable to the mains.
3. Now press the on / off switch on the visualiser.
4. Image transfer can now begin with use of a supporting software on your
computer.
5. The selection keys on the visualizer can not be used under these settings.
Control is carried out on the software.
6. With the built-in microphone, the document camera can also be used for video
teleconferencing or alike.
Option 2:
1. Connect a computer via VGA cable to the document camera using the
VGA input.
2. Then connect the display device to the document camera via VGA cable using
the VGA output.
3. Connect the power adapter to the mains.
4. If the document camera is off, the image of the computer will be displayed by
the display device. As soon as you turn on the document camera, the image
from the camera is displayed on the display. Switching between sources is only
possible by switching the document camera on and off.
Note:
The celexon document camera V500 can be used with any TWAIN enabled PC
software.
Mouse function
You can operate the document camera with a computer mouse connected to
the USB port. In addition, comments can be made on the image by selecting the
„Comment“ field.
6
Connecting and using the device with computer
