5
Explanations of the inputs and outputs
Connecting and using the device without a computer
SD card slot:
Here you can connect an SD card to the device to save or display pictures or videos.
The SD card must be formatted in FAT32 format.
HDMI output:
Through the HDMI output, you can display the image produced by the document
camera with a HDMI cable on a display device.
VGA input:
You can use the VGA VGA IN port of the visualiser to pass through a signal from
another device (e.g. Laptop) to the display device (e.g. Projector).
VGA output:
Via the VGA output, you can display the image of the document camera or the
VGA-IN port to the display device.
USB output:
Using the USB output, you can use suitable computer software to display the image
of the document camera on a PC.
1. Connect the device with the supplied VGA or HDMI cable to your desired
display device.
2. Connect the power adapter to the mains.
3. Now press the on / off switch on the visualizer.
4. If your display does not have automatic source selection, select the signal
input on your display according to your connection method.
5. The device is ready for use and can be operated with the buttons on the device.
