Celestron 44330, Instruction Manual

Page: 3 / 40

3
Standard Accessories with your Microscope
y
20x Eyepiece
y
Digital Camera w/ USB Cable
y
5x Objective Lens
y
3 Prepared Slides
y
10x Objective Lens
y
CD-ROM – ArcSoft Software
y
20x Objective Lens
y
Instruction Manual
y
Bottom Illuminator
Specifications
Model # 44330 Specifications
Stage Plain Stage with Spring Loaded Clips – 80 mm x 60 mm (3.1” x 2.4”)
Eyepiece Glass Optics
Focuser Coarse Focus – Dual Knobs
Objective Lenses All Glass Optics – 5x (100 power), 10x (200 power), 20x (400 power)
USB Cable 2.0
Illuminator -- Bottom LED -- Uses 2AAA Batteries (user supplied)
Nosepiece Triple with Click Stop
Digital Camera 2MP CMOS – 1600x1200 pixel array
Weight (with batteries)
and Dimensions
19oz (539g) 4.5” x 4” x 6” (114 mm x 102 mm x 152 mm)
Setting Up Your Microscope
1. Carefully remove the microscope and other parts from
the box and set them on a table, desk, or other flat
surface.
2. Remove the plastic bag covering the microscope.
3. Remove the plastic plug up cap from the eyepiece tube
and install the eyepiece – see Figure 1.
4. Install the batteries for the bottom illuminator in the
base of the microscope which uses two AAA batteries
(user supplied). See Figure 2 showing the open battery
compartment under (bottom) microscope. Install the
batteries (see the inside of the battery compartment where the positive (+)
and negative (-) ends of the batteries go).
You are now ready to use your microscope for looking at specimen slides or
small objects through the microscope eyepiece as an optical microscope! For
using the digital (CMOS) camera, installation and operating instructions will
follow later in this manual.
Figure 2