Copyright © 2012 Celeno Communications™ - All Rights Reserved | www.celeno.com pg. 21
The following table describes the parameters you can configure from this window:
Table 3: VXT1836 Configuration – Network Parameters
Parameter
Description
Ethernet port mode
The properties of the Ethernet (LAN) port of the
device: Can be either auto negotiated up to 1Gbps
or fixed to 100Mbps.
Obtain an IP address automatically
When selected, the device acts as a DHCP client
and obtains its IP properties automatically.
IP Address
The IP address of the VXT1836 device
(under static IP setting)
Subnet Mask
The subnet mask of the VXT1836 device.
(under static IP setting)
Default Gateway
The default gateway of the VXT1836 device.
(under static IP setting)
DNS Server
The DNS server of the VXT1836 device.
(under static IP setting)
Enable Dynamic DNS
When checked the VXT1836 device will use
dynamic DNS protocol to register its alias into the
DNS server. This will allow accessing the device
using the given alias instead of its IP address.
Alias
The given hostname of the VXT1836 device
Login and Password
The login credentials of the DNS server/home
router.
Enable IGMP Proxy*
The device will operate as an IGMP Proxy
Enable IGMP SSM*
The device will support IGMP SSM
2.
Click
Apply
to update the settings immediately. The system displays an update
message.
3.
Click
OK
and wait for the system to restart.
* AP only parameter
