17
3
Receive Test
A
Receive Test
is used to set up and test the module for receiving IEEE 802.15.4-2003
packetized data. By running a
Transmit Test
on one of the modules and a
Receive Test
on
the other, you can perform a
Range Test
. The tasks described in this chapter include:
•
Running a Default Receive Test
— page 17
•
Editing Receive Test Settings
— page 19
Receive Test Settings
•
Channel
— page 18
•
Boost mode
— page 18
•
Sample window
— page 18
•
Percentage error alert
— page 18
•
RSSI alert
— page 19
Running a Default Receive Test
1. From the top menu, press
UP
or
DOWN
until the
Receive
test displays.
2. Press
OK
to display
Start Receive
.
3. Press
OK
again to start the test. The LCD displays:
•
Rx
indicates that the
Receive
test is running.
•
P#
displays the number of packets being received.
•
ER
displays the percentage of errors.
•
RS
displays the Received Signal Strength Indication (RSSI) values.
4. To stop the test press
EXIT
.
