15
This document is subject to change without notice.
Document No: 0019-02-08-01-000 (Issue B)
Date Published: September 9, 2015
B1010SP0-EVB-1 Evaluation Board User Guide
COMPANION PHONE APPS: CSRMESH SDK
The Target board LED can be controlled via a companion Android or iOS app. The apps can be downloaded from the CSRmesh
portion of the CSR Support website. This section will describe the operation of the Android app.
The app will connect to a CSRmesh device. The device acts as a bridge from the phone app to the rest of the CSRmesh
network.
1. When the app is launched, the initial screen shown below is displayed.
2. Tap on "Device Association" to search for devices that support CSRmesh.
3. Tap a discovered device to connect to it.
4. The app may ask you for a network passphrase. Enter any suitable passphrase to be used by all your trusted devices.
Select the check box "Authorise Devices" only if you wish to use optional device authentication and know the short codes
(private keys) for each of your end devices.
5. To control the Target board LED, select the Light Control menu option. Tap on the red portion of the color wheel and
switch the control to "On". You should see the Target board LED toggle off/on as you tap between "Off" and "On".
Note: The app was designed to be used with a tri-color LED, while this eval board only has a single-color red LED, so
ensure that the red region on the color wheel is selected. Also, the dimming feature of the app is not supported.
Figure 25 - Initial Screen, Device Association Screen, Light Control Screen
NEXT STEPS
For the µEnergy SDK, CSR provides application notes for many different BLE example applications, including an Alert Tag,
Blood Glucose Sensor, Blood Pressure Sensor, Keyboard, Mouse, etc. Visit the "Example Applications" section at
For the CSRmesh SDK, CSR provides application notes for many different CSRmesh example applications, including a Switch,
Heater, Temperature Sensor, etc. Visit the CSRmesh portion of the CSR Support website for a complete list.
