13
This document is subject to change without notice.
Document No: 0019-02-08-01-000 (Issue B)
Date Published: September 9, 2015
B1010SP0-EVB-1 Evaluation Board User Guide
Figure 22 - xIDE Window
2. Open the Light Control project by clicking on "Project" in the menu bar and selecting "Open Workspace". Navigate to the
SDK installation folder. If the default installation path was chosen, this will be
C:\CSR_uEnergy_CSRmesh\applications\CSRmeshLight
.
The Light Control application allows a Bluetooth Smart-enabled phone to send and receive CSRmesh commands and
enables the user to control the LED on the Target board.
Figure 23 - Default Location of CSRmeshLight Project
3. Compile the Light Control application by clicking on
Build
in the SDK menu bar. Select
Build Active Project
or press
F7
shortcut key. This will build all of the files included in the active project in the current workspace using the selected
configuration into an application image for the Target board.
The build is incremental, so the minimum set of builds are performed in order to reflect changes to source files and
configurations. The Target board must remain connected during compilation.
