CEL-MAR DES-300, User Manual

Page: 3 / 16

1. GENERAL INFORMATION
1.1. WARRANTED INFORMATION
CEL-MAR Company gives a two-year warranty on the DES-300 sensor. The warranty does not cover damage caused from improper
use, materials consumption or any unauthorized changes. If the product does not function in accordance with the instructions, will be
repaired or replaced.
All warranty and no warranty repairs must be returned with paid transport and insuring to the
CEL-MAR Company.
CEL-MAR Company under no circumstances won't be responsible for ensuing damage from improper using the product or as a result
of random causes: the lightning discharge, the flood, the fire and the like.
CEL-MAR Company is not be held responsible for damages and loss including: loss of profits, loss of data, pecuniary losses ensuing
from using or the impossibility of using this product.
In specific cases
CEL-MAR Company discontinue all warranties and in particular do not follow the user manual and do not accept
terms of warranty by the user
1.2. GENERAL CONDITIONS FOR SAFE USE
The device should install in the safe and stable place, the connecting cable should be arranged this way isn't exposed to treading,
catching or tear out from sensor
Do not put device on the wet surface.
Do not connect devices for nondescript powering sources,
Do not damage or crush powering wires.
Do not make connection with wet hands.
Do not adapt, open or make holes in casings of the device!
Do not immerse device in water or no other liquid.
Do not put the fire opened on device sources: candles, an oil lamps and the like.
1.3. CE LABEL
CE symbol on organizing the company CEL-MAR a conformity of the device to the directive of the electromagnetic EMC
2014/30/WE (Electromagnetic Compatibility Directive). The declaration of the agreement is accessible through the
contact with the technical service at the address e-mail: service@cel-mar.pl or on the phone at the +48 41 362-12-46.
1.4. ENVIRONMENTAL PRESERVATION
This sign on the device inform about putting expended device with other waste materials. Device should send to the
recycling. (In accordance with the act about the Electronic Appliance Expended from day 29 of July 2005)
1.5. SERVICE AND CONSERVATION
It is recommended to check the status of cases and sensor connecting cables, to eliminate the effect of mechanical damage on the
quality of measurement.
Technical support at the number: +48 41 362-12-46 in 8.00-16.00, from Monday to Friday
2. APPLICATION
DES-300 sensor is used to for measurement of environmental parameters like temperature, relative humidity, atmospheric pressure,
illumination, concentration of CO2 in :
–
offices with the use of structured cabling
–
flats
–
houses
via the serial 1-WIRE Bus.
Application of 1-Wire bus enables:
–
the cooperation of many sensors connected to the same data lines,
–
the deployment of sensors in various locations up to 300m,
–
powering the sensors from the bus,
–
correct transmission of measurement data secure check sum CRC.
DES-300 sensor can be installed on wiring recessed cans or on the walls.
3
DES-300