CEL-MAR ADA-4040PC3 User Manual Download Page 3

Page: 3 / 20

1. GENERAL INFORMATION

Thank you for your purchase of

CEL-MAR Company

product. This product has been completely tested and is covered by a two year

warranty on parts and operation from date of sale.
If any questions or problems arise during installation or use of this product, please do not hesitate to contact Technical Support at +48
41 362-12-46 or e-mail [email protected].

1.1. WARRANTED INFORMATION

ADA-4040PC3

converter is covered by a two year warranty from date of sale. In case of being damaged it will be repair or the

damaged component will be replace. The warranty does not cover damage caused from improper use, materials consumption or any
unauthorized changes. If the product does not function (is damaged), or not operate in accordance with the instructions, will be
repaired or replaced.
All warranty and no warranty repairs must be returned with paid transport and insuring to the

CEL-MAR Company.

CEL-MAR Company

under no circumstances won't be responsible for ensuing damage from improper using the product or as a result

of random causes: the lightning discharge, the flood, the fire and the like.

CEL-MAR Company

is not be held responsible for damages and loss including: loss of profits, loss of data, pecuniary losses ensuing

from using or the impossibility of using this product.
In specific cases

CEL-MAR Company

discontinue all warranties and in particular do not follow the user manual and do not accept

terms of warranty by the user.

1.2. GENERAL CONDITIONS FOR SAFE USE

The device should be installed in a safe and stable places (eg, electroinstallation cabinet), the powering cable should be arranged so
as not to be exposed to trampling, attaching, or pulling out of the circuit.
Do not put device on the wet surface.
Do not connect devices for nondescript powering sources,
Do not damage or crush powering wires.
Do not make connection with wet hands.
Do not adapt, open or make holes in casings of the device!
Do not immerse device in water or no other liquid.
Do not put the fire opened on device sources: candles, an oil lamps and the like.
Complete disable from the supply network is only after disconnecting the power supply circuit voltage.
Do not carry out the assembly or disassembly of the device if it is enabled. This may result to short circuit and damage the device.
The device can not be used for applications that determine human life and health (eg. Medical).

1.3. CE LABEL

The CE symbol on the device CEL-MAR means compatibility with electromagnetic compatibility Electromagnetic
Compatibility Directive

EMC 2014/30/WE.

Declaration of Conformity is delivered with purchased device.

1.4. ENVIRONMENTAL PRESERVATION

This sign on the device inform about putting expended device with other waste materials. Device should send to the
recycling. (In accordance with the act about the Electronic Appliance Expended from day 29 of July 2005)

1.5. SERVICE AND MAINTENANCE

Converter ADA-4040PC3 does not require the servicing and maintenance.
Technical support is available at 48 41 362-12-46 in 8.00-16.00, from Monday to Friday or e-mail

[email protected]

1.6. PACK CONTENTS

ADA-4040PC3 converter; user manual; CE declaration; Line terminators 120

CD with ADAConfig software.

2. PRODUCT INFORMATION

2.1. PROPERTIES

●

Conversion of protocols SunMaster to MODBUS-RTU and inversely,

●

Baud rate and data format conversion between SunMaster and MODBUS-RTU.

●

Operating on 2 or 4 wire buses in RS485/RS422 standard,

●

Baud rate, set on RS485/RS422 interfaces (bps): 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800, 38400,
57600, 76800, 115200, 230400.

●

Data format RS485/422 :

•

Data bit: 5, 6, 7, 8,

•

Parity: None, Odd, Even,

•

Number of stop bits: 1, 2,

●

Power supply 10 - 30 VDC stable min. 2W,

●

~3kV= optoizolation in signal channel between RS485/422 (MODBUS-RTU) and RS485/422 (SunMaster) interface,