Fig. 18. The web page for network setting of ADA-13021MG
5.2.2. SERIAL PORT CONFIGURATION
The configuration of serial port (Current Loop) of ADA-13021MG converter includes: port description, setting of port profile (operating
mode) and setting of serial transmission parameters (baud rate, data bits, parity, stop bits).
Select on left panel
Configuration -> Serial Ports
and then on a page
Serial Port Configuration
select
[Port 1],
will open the
configuration details page, includes:
–
Port Profile Settings,
–
Basic Serial Settings,
–
Advanced Serial Settings,
5.2.2.1. SERIAL PORT PROFILE CONFIGURATION (OPERATING MODE)
Select on right panel
Serial Port Configuration -> Port Profile Settings
and then press
Change Profile...
will open the page
Select
Port Profile
for selection of available port profiles (fig. 19).
Configuration of profile used in typical solutions will be presented in next chapters.
ADA-13021MG operates properly in profiles as follows:
–
RealPort
–
TCP Sockets
–
UDP Sockets
–
Serial Bridge
Configuration of profiles will be presented in next chapters.
17
ADA-13021MG
