WARNING: Use of this equipment adjacent to or stacked with other
equipment should be avoided due to risk of improper operation.
If such operation is unavoidable, this equipment and the other
equipment must be observed to verify that all equipment operates
normally.
WARNING: Use of accessories, transducers and cables other than
those specified or provided by the manufacturer of this equipment
may result in increased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in improper
operation.
WARNING: Portable RF communications equipment (including
peripherals such as antenna cables and external antennas) should be
used no closer than 30 cm (12 inches) to any part of the Air Supply
MV600-2, including cables specified by the manufacturer. Failure to
comply with this warning may result in degradation of the perfor-
mance of this equipment.
NOTE: The EMISSIONS characteristics of this equipment make it
suitable for use in industrial areas and hospitals (CISPR 11 class A). If
the equipment is used in a residential environment (CISPR 11 class
B is normally required) this equipment might not offer adequate
protection to radio-frequency communication services. The user may
need to take mitigation measures, such as relocating or re-orienting
the equipment.
Electromagnetic Emissions
The Air Sup
ply
MV600-2 is intended for use in the electromagnetic environ-
ment indicated below.
RF Emissions CISPR 11: Group 1
FR Emissions CISPR 11: Class A
Harmonic Emissions: Class A
Voltage Fluctuations/Flicker Emissions: Compliant
NOTE: The Air Supply MV600-2 should be used in the following environmen-
tal conditions with: (a) an ambient temperature range of + 10 °C to + 40 °C,
(b) a relative humidity range of 30 % to 75 %, and (c) a standard atmospheric
pressure environment.
NOTE: Any equipment RF emissions will not likely cause interference with
nearby electronic equipment.
4
