CEECO SSW-520-F Service Manual Download Page 9

ISSUE 4.0 

CEECO 

Communication Equipment & Engineering Company 

PROPRIETARY 

10.0  REPAIR AND RETURN INFORMATION 

 
 
 

10.1 

WARRANTY REPAIR 

  

 

 
Any device returned requiring warranty service, repair or credit must be 
accompanied with a "Return Material Authorization" (RMA) FORM.  It 
must include:  return shipping instructions, original purchase order number 
and special marking instruction.  A description of the trouble observed 
must be attached to the defective unit.  This information must be inside the 
shipping container. 
 

 

10.2 

DIRECT ALL INQUIRES TO: 

 
 

CEECO 

Repair Department 

519 West South Park Street 

Okeechobee, FL.  34972 

 

(863) 357-0798 

(863) 357-0006 (FAX) 

 

 
 

10.3 

NON-WARRANTY REPAIR

 

 

CEECO will repair equipment out of warranty for a set charge plus parts.  
The customer must pay the shipping costs for both directions. 

 
 

10.4 

RETURN FOR CREDIT

 

 

Material may be returned for credit only with prior approval.  Material 
authorized for return is subject to a 20% restocking charge based on the 
manufacturer’s list price. Return Material Authorization must be requested 
no later than 30 days after original shipment 

Summary of Contents for SSW-520-F











Reviews: