ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
5
4.0
OPERATION
To make a call, press the "CALL" button located on the front of the phone and
wait for dial tone. The RED LED (if provided) will light at this time. When dial
tone is received the transmitter is muted and the phone waits for numbers to be
dialed
.
After the call is complete, press the button again. The RED LED (if provided)
goes out and the call is terminated. If user does not press the "CALL" button
when he or she is finished using the phone, then the phone will hang up after
detecting dial tone or when the timer times out.
5.0
RECOMMENDED TOOLS AND TEST EQUIPMENT
Volt/Ohm Meter
Security Tool, CEECO part number 301-037
Flat Blade Screw Driver
*****WARNING*****
A.
Never install telephone wiring during a lightning storm.
B.
Never install telephone jacks in wet locations unless the
jack is specifically designed for wet locations.
C.
Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
D.
Use caution when installing or modifying telephone lines.