ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
5
3.0
PROGRAMMING
NOTE:
It is recommended that you ground yourself to prevent ESD
damage to the PCB(s).
*****WARNING*****
A.
Never install telephone wiring during a lightning storm.
B.
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
C.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
D.
Use caution when installing or modifying telephone lines.
*If background noise elimination is desired, proceed with the following sections of
programming. Otherwise, the phone is ready to be installed and used.
1)
Connect
the Ceeco XFD Series Telephone
to the Telephone Line provided by your local
Telephone Company or to analog type PABX Station.
2)
Using another Telephone (Different Telephone Line or cell phone) equipped with a Touch Tone
Keypad,
call the CEECO XFD Series Telephone
.
3)
After 4 rings
of the CEECO Telephone,
answer it
by lifting the handset off hook and keep it that
way. Three tones should be heard indicating the phone is ready for remote input.
4)
With the other phone, enter # 2 3 3 2 6 *
. This is the factory default 5-digit pass code.
Instructions for changing the pass code appear below.
Two (2) beeps
will be heard indicating a
valid Pass Code entry. Five (5) beeps will only be heard when an error occurs and programming
was not accepted.
Two (2) beeps
will always be given to indicate each successful programming
entry below.
Enter # 9 7 * to clear all memory. It is not necessary to do this hereafter. Individual
programming options may be changed from time to time by entering only the necessary key
presses and there is no requirement to “re-program” everything each time.
If the environment is noisy and background noise elimination is desired, enter # 5 9 1 *.
In order to change the Pass Code, enter # 3 1 x * (where x = any 5-Digit pass code).
When programming is completed, simply hang up.
Release Firmware: xfd31_v1_1