ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
10
4.0 TESTING/OPERATION
Action:
Connect the phone to a working telephone line or DTMF test set.
Press
the
"CALL"
button.
Reaction:
Dial tone. Red LED illuminates (If equipped)
The preprogrammed number is automatically dialed.
Action:
The called party answers.
Reaction:
A normal speakerphone conversation is allowed.
Action:
Finish the conversation and press the "CALL" button to hang up.
Reaction:
Red LED goes out. (If equipped) and the call is terminated. If you
do not hang up the phone it will automatically disconnect if you
programmed it as such.
Action:
Place a call to the telephone from another telephone.
Reaction:
The telephone rings. Press the “CALL” button to answer the call.
The red LED illuminates (if equipped). The pre-programmed
number will dial out, but should be ignored. A normal
speakerphone conversation is allowed.
Action:
Finish the conversation and press the “CALL” button to hang up.
Reaction:
The red LED goes out, (if equipped) and the call is terminated. If
the phone is not hung up, it will automatically disconnect if it has
been
programmed
as
such (refer to section 3.0).
5.0 RECOMMENDED TOOLS AND TEST EQUIPMENT
Security Tool, CEECO part number 301-037
Insulated Needle Nose Pliers
Flat Blade /Phillips Head Screwdriver
Volt/Ohm Meter