ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
5
3.0 PROGRAMMING
NOTE:
It is recommended that you ground yourself to prevent ESD damage to
the PCB(s).
3.1
Connect the telephone
to a working telephone line or a DTMF test set.
3.2
Locate the pair of plastic
mini-jumpers
along the edge of the PC board. Move
them to the
“on”
or inner most position as depicted in the diagram on the last
page of this manual.
3.3 Press
the “CALL & HANGUP”
button
and wait for dial tone before entering
programming digits.
3.4
Begin by entering
#97
, which
will clear all
user programmable
memory.
NOTE:
Once the # key has been entered, you may hear a fast busy tone, an
operator recording, or other Central Office signals. Please disregard these sounds
and continue programming, as they will have no effect on the programming.
3.5
Each programming location is accessed by dialing the # sign and the
corresponding two digit code. The previous contents of the location are
automatically erased when the location code is accessed.
3.6
Enter #00, followed by
a series of
ten (10) digits
as selected from the following
page. Location “00” is the telephone options location. By entering a selected
number of 0-9 into each of the ten digit locations, the phone is customized for the
particular installation.
