ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
11
4.0 OPERATION
4.1
To make a call, press the black "CALL" button located on the front of the phone.
When dial tone is received, the transmitter is muted and the phone waits for
numbers to be dialed.
4.2
Press the desired two keys on the keypad to release a pre-programmed speed dial
number. The digits should dial out. When answered, a normal speakerphone
conversation may take place.
4.2
After the call is complete, press the "CALL" button again to terminate the call. If
user does not press the "CALL" button when he or she is finished using the
phone, then the phone will hang-up after detecting a WINK (momentary open) or
when the timer times-out, if it was so programmed.
NOTE:
In some cases, a local PBX does not automatically send a wink
back as a Central Office would. Some of these PBXs can be
programmed to do so. It would be necessary to contact the
manufacturer of the PBX.
5.0
RECOMMENDED TOOLS AND TEST EQUIPMENT
DTMF Test Set
Volt/Ohm Meter
3/8" Nut Driver
5/16" Nut Driver
Flat Blade Screw Driver
Security Tool, CEECO Part Number 301-064
