ISSUE 4.0
1.0 INTRODUCTION
The practices in this manual provide installation and maintenance information for
the CEECO Model SSP-363-E (formerly SSP-365-E) Telephone, equipped with
ADT1.03 firmware.
The information in this manual is subject to change without notification.
For information not included in this manual, please call or write:
CEECO
Customer Service
1580 NW 65th Avenue
Plantation, FL 33313
(954) 587-5430 VOICE
(954) 587-5440 FAX
2.0 GENERAL
2.1
The CEECO Model SSP-363-E Speed Dialer Telephone is a
microprocessor-based telephone designed to deter fraud from hand held
tone dialers and hookswitch dialing. The microprocessor keeps the
transmitter muted (off) during periods of dial tone. Attempts to dial a
number by “flashing” the hookswitch will cause the microprocessor to
"reset" and open the line.
2.2
One of twelve preprogrammed numbers, of up to twenty-three (23) digits
in length, may be speed dialed. This is accomplished by pressing one
button on the Single Button Access (SBA) keypad located on the front of
the telephone.
2.3
Programming is accomplished via the 12 button SBA keypad, or an
external, separately provided, modular keypad that plugs into the printed
circuit board during programming periods only.
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
4