ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
4
1.0
INTRODUCTION
The practices in this manual provide installation and maintenance information for the
CEECO Voice Over Internet Protocol (VoIP) Model IP-HOB-531-X Hands free Weather
Resistant Telephone or Model IP-SSP-511-X Stainless Steel Panel Telephone, equipped
with SPK1.07r1 firmware.
The information in this manual is subject to change without notification.
For information not included in this manual, please call or write:
CEECO
Customer Service
519 West South Park Street
Okeechobee, Florida 34972
(863) 357-0798
(863) 357-0006 FAX
2.0
GENERAL
2.1
The CEECO Model IP-HOB-531-X Hands Free Weather resistant
telephone is a sturdy, vandal resistant, stainless steel weather resistant
speakerphone. Instead of a hookswitch and handset, the IP-HOB-531-X
has a Press to start/Press to stop button for initiation and termination of
phone calls. This Emergency button is provided for automatic ring down
applications. Ordinarily, the telephone can only be used to receive calls.
The telephone may, however, be used to initiate calls
if
it is used in
conjunction with external call equipment (i.e. programmable switch, ring
down circuit, etc…) The Model IP-SSP-511-X is the same telephone
without the weather resistant housing. It is designed to be installed in
either the HOB series weather resistant housings or the HOB series open-
faced weather-resistant housings.
2.2
Incoming calls may be allowed or blocked depending on the
programming.
2.3
Programming is accomplished via the DTMF keypad.
*The VoIP ATA unit does require an AC power source as described in the
installation notes.
*The VoIP ATA typically comes in a separate but included package, but
may also come already positioned within the telephone.