ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
4.0
OPERATION
When the phone is connected to the phone line and programmed according to
section 2, the phone operates as follows:
4.1
When the phone is lifted off hook, dial tone is heard and the keypad is
operational. Before and during dialing, the transmitter is turned off.
4.2
To dial a programmed number press the two digit code that corresponds to
the number logged in section 3. The phone automatically dials the
programmed number and the transmitter turns on. The keypad is available
for use once speed dial number is accessed.
4.3
At the completion of the call the user replaces the handset back “on-
hook”.
5.0
RECOMMENDED TOOLS AND TEST EQUIPMENT
DTMF Test Set
Volt/Ohm Meter
1/4" Nut Driver
Flat Blade Screw Driver
Security Tool 301-037
*The security tool is for a standard 5/32" button
head screw generally used on the framework of the
phone booths.
*****WARNING*****
A.
Never install telephone wiring during a lightening storm.
B.
Never install telephone jacks in west locations unless the jack is specifically
designed for wet locations.
C.
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface
D.
Use caution when installing or modifying telephone lines.
