ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
4
1.0
INTRODUCTION
The practices in this manual provide installation and maintenance information for
the Model HOB-313-DD-48 Two-Button Automatic Dialer Panel Telephone,
equipped with CAC4.04-42 software.
For information not included in this manual, please call or write:
CEECO
Customer Service
519 West South Park Street
Okeechobee, FL 34972
(863) 357-0798
2.0
GENERAL
The CEECO Model HOB-313-DD-48 Telephone, equipped with CAC4.04-42
Firmware, is a stainless steel, microprocessor-based, coinless panel phone
designed to withstand abuse and fraudulent call attempts. The transmitter is
muted during periods of dial tone eliminating the use of hand held dialers.
Attempts to hookswitch dial a number will cause the microprocessor to go “on
hook” until the attempt has ended. Incoming calls may be allowed or blocked
depending upon the programming. If programmed to block incoming calls, the
phone will drop the line upon receipt of an incoming call. Programming is
accomplished via the DTMF keypad inside the telephone housing.
This model telephone is intended for use with the open-faced, weather-resistant
housing, P/N 331-HOB
The phone also comes with a custom handset, which is blue in color and has a
54” long armored cord.