Issue 4.0
CEECO
Communication Equipment and Engineering Company
PROPRIETARY
8
PROGRAMMING CONTINUED
3.9
Location #00 is the option number, by entering 0 or 1 into each of the 8 digit
locations below, the phone is customized to each particular installation.
LOCATION #00:
Digit 1:
0
No incoming calls allowed.
1
Incoming calls allowed.
Digit 2:
0
Call restrictions are in effect. (#70-#79 only.)
1
No call restrictions.
Digit 3:
0
All calling cards are allowed.
1
All calling cards are blocked.
Digit 4:
0
Memory inspection disabled.
1
Memory inspection enabled.
Digit 5:
0
Send expiration date of Bank Cards mm/yr (i.e. AT&T as long distance carrier).
1
Do not send expiration date of Bank Cards (i.e. MCI as long distance carrier).
Digit 6:
0
Send only credit card numbers.
1
Send all credit card information on Track 2 (for use with a Call Processor).
Digit 7:
0
Always 0 for Insertion type card reader.
Digit 8:
0
Wide dial tone detect window.
1
Narrow dial tone detect window.
3.10 Locations #31-#50 are for the Speed Dial Table. Up to eleven digits may be
entered in each location. Enter # followed by the location number and the number
to be speed dialed from the keypad.
3.11 When programming is completed, place the two mini-jumpers in the "OFF"
position, replace and secure the backplate, and place the phone on hook.
PROGRAMMING CONTINUED