TOF/Spot
English
© CEDES | V 4.0
11
13. Trouble shooting
Status
Action
LED off
Check supply power
Check electrical
connections
Object in the
safeguarded area and
LED dimmed red
Check distance setting
Check alignment
No object in the
safeguarded area and
LED bright red
Check electrical
connections
Check distance setting
Check alignment
If the problem persists, please contact your local CEDES
representative (www.cedes.com).
14. Maintenance
Although the TOF/Spot does not need regular maintenance,
a periodical functional check is strongly recommended as
follows:
Check the mounting position and detection area of the
sensor
Clean the optical window with a soft towel and a little
soapy water
NOTICE
Damage to the optical window
Never use any solvents, cleaners
or mechanically abrasive towels or
highpressure water to clean the sensors.
15. Disposal
The TOF/Spot should only be replaced if a similar protection
device is installed. Disposal should be done using the
most up-to-date recycling technology according to local
regulations and laws. There are no harmful materials used
in the design and manufacture of the sensor. Traces of
such dangerous materials may be found in the electronic
components but not in the quantities that are harmful.
16. Product Label
Each TOF/Spot is labelled as below.
It contains following information:
Figure 25:
Product label - TOF/Spot (standard version)
Lot No.:
yymmdd: year (2 digits), month, day
mmmmmmmm: manufacturing job number
eeeee: employee number responsible for final test
cccccc: incremental number
