MONTROSE DOOR
Step 25: Fit Door Stop in door way. Check all wall
panels are straight and panels either side of
doorway are tight against door stop. Screw pan-
els to floor using 1 x 75mm tek screw per panel.
Screw near the panel joins, where possible.
Nail door stop to floor using 3 x 75mm framing
nails.
Step 26: Fit Door in position as shown.
Step 27: Using 3 x 75mm tek screws, screw
door stud to panel ensuring height is correct.
Check that door opens and closes correctly and
height is correct.
Fit handle as shown. Attach with 2 x handle
screws. Attach and tighten latch to square shaft.
Using 5 x 50mm beading nails, nail 20mm pack-
er onto side of door opening as shown in Wall
plan on pg. 5.
PG 11
Summary of Contents for Montrose Shingle Roof
Page 1: ...CEDARSHED INSTRUCTIONS MONTROSE SHINGLE ROOF Base size 3000mm x 2490mm deep ...
Page 15: ......
Page 16: ......