Cedar DNS 4, Owner'S Manual

Page: 14 / 32

CEDAR DNS 4 dialogue noise suppressor
Page 14
The process page
The DNS 4 boots into the Process page and returns to it from any other page after a short
timeout. This displays information about all four channels simultaneously.
■
Input level meters
The left of the display shows input level meters for each of the four channels. These are
for information only; the input gain controls are available in the Channel setup page.
■
Process readouts
The rest of the display shows the process settings for each of the four channels. The
information shown for each channel is:
•
the noise Attenuation
•
the Bias
• the linking status
Channel linking
You can link certain combinations of channels into groups. Grouping channels makes
them adopt identical settings, and allows you to adjust them together. The channels in a
group share the same values of the following parameters:
•
input gain
• high-pass filter on/off
• processing on/off
•
learn on/off
•
Attenuation
•
Bias
Nonetheless, the Learn function continues to work independently for each channel in a
group and the signal processing itself is not linked. This ensures that, if the parameters
are appropriate, the processing is appropriate for the signal in each channel.