CEDAR Duo – declickle and auto dehiss
17
MIDI Controller Numbers (Auto dehiss only)
Command
CC# Comments
Process mode
15
■
0-63 = Left/Right
■
64-127 = Mid & Side
Level A
(left or mid)
20
0-127 maps to -99.5dB to 0dB
Level B
(right or side)
21
0-127 maps to -99.5dB to 0dB
Auto bias A
22
0-127 maps to +10.0 to -03.0
Auto bias B
23
0-127 maps to +10.0 to -03.0
LF Bias A
24
0-127 maps to +20.0 to -20.0
LF Bias B
25
0-127 maps to +20.0 to -20.0
Atten A
26
0-127 maps to 0.0 to -40.0
Atten B
27
0-127 maps to 0.0 to -40.0
Auto mode
on/off
28
■
0-63 = Auto mode OFF
■
64-127 = Auto mode ON
Patch change messages
Ordinarily, a patch change message (Patch=NN) causes the user memory of the corresponding
number (NN) to be recalled. There are 99 user memories, and patch numbers outside the range
1-99 are ignored, except for the following special cases:
■
Sending Patch=0 causes the audio parameters to return to their factory default values
■
Sending Patch=125 followed by Patch=NN causes memory NN to be deleted
■
Sending Patch=126 followed by Patch=NN saves the current settings to memory NN
■
Sending Patch=127 after patch 125 or 126 acts as a "CANCEL" function