CEDAR Duo – declickle and auto dehiss
11
■
Serial number
Reports the serial number of this unit.
Audio I/O
■
Output
Press the OUTPUT option repeatedly to cycle through 16, 18, 20 and 24-bit output wordlength
options. You should choose the option most suitable for the next device in the audio chain.
The internal 32-bit wordlengths are dithered to the output wordlength using TPDF dithering.
■
Gain
Press the GAIN option and use the spinwheel to adjust the gain of the unit between -10dB and
+10dB in steps of 0.1dB.
■
Level
This displays the signal level presented to the unit's input. A 'peak hold' is implemented, and the
unit will display the word CLIP! if it detects digital ‘overs’.
Pressing the LEVEL button in this screen will reset the peak hold.
■
Bypass
Press the BYPASS option to bypass the Duo's processing. In this mode, the Duo is 24-bit
transparent. The latency is reduced to less than 10 samples.
■
Close
Press CLOSE to return to the Main screen.
Physical Connections
Audio
Your Duo offers two audio connection standards, and passes its signal to both outputs
irrespective of the input used. The standards are:
■
Digital SPDIF format audio data
SPDIF is used by domestic and semi-professional digital audio devices.
You should connect the SPDIF output from your source to the SPDIF input of the Duo using a
single cable terminated with an RCA (or 'phono') plug. The SPDIF output of the Duo should be
connected to the SPDIF input of a recording device or external DAC.
