21
REMOTE CONTROL OPERATION
Fig. 17
Fig. 18
Fig. 19
MATCHING SECURITY CODES
When matching security codes, be sure slide button on the receiver is in the REMOTE position.
To program the remote receiver to LEARN a new security code, press and release the LEARN
button on the top of the remote receiver, and then press ON or OFF button on the transmitter.
A change in the beeping pattern at the receiver, indicates the transmitter's code has been
programmed into the receiver.
REMOTE CONTROL OPERATION
This appliance must not be used with glass
doors in the closed position.
This can lead to pilot outages and severe
sooting outside the fireplace.
The transmitter operates on two AAA batteries.
KEY SETINGS
ON
- Operates unit to on position, Manually
operated solenoid ON.
OFF
- Operates unit to off position, Manually
operated solenoid OFF.
MODE
-Changes unit from manual mode to
thermo mode.
SET
- Sets temperature in thermo mode.
LCD Liquid Crystal Display
1. DISPLAY Indicates CURRENT room
temperature.
2. °F or °C Indicates degrees Fahrenheit or
Celsius.
3. FLAME Indicates burner/valve in operation.
4. ROOM Indicates remote is in THERMO
operation.
5. TEMP Appears during manual operation.
6. SET Appears during time the of setting the
desired temperature in the thermo operation.
Summary of Contents for CRHSD25RT
Page 33: ...33 ...
