www.factorybuysdirect.com
200308-01A
12
NG
LP
NG
LP
INSTALLATION
Figure 11 - Assembling Base Feet
Figure 12 - Attaching Base Feet to Heater
Figure 13 - Securing Heater to Floor
Foot
Columns
Leg
Bracket
Base Cut Out
Screw
Hole
Screw
Screw
Finished
Assembly
INSTALLING OPTIONAL BASE FEET
(See Accessories, page 27)
5. Position the heater to the desired location.
Secure the base feet to the floor by us-
ing two Phillips head self tapping screws
(provided) (see Figure 13).
1. Snap the left and right foot columns to-
gether (see Figure 11).
2. Place the column assembly in the center
of the base cut out. Fasten column as-
sembly by using two Phillips head self
taping screws (provided) (see Figure 11).
3. Place leg bracket on the top of column as-
sembly and fasten it by using two Phillips
head self tapping screws (provided) (see
Figure 11).
4. Align four screw holes to the base of
the heater and attach it by using Phillips
head self tapping screws (provided) (see
Figure 12).
