cecotec BREEZECARE 4000 CONNECTED, Instruction Manual, Page: 21 / 51

BREEZECARE 4000 CONNECTED BREEZECARE 4000 CONNECTED 41 40
ENGLISH ENGLISH
Humidifier produces
an unusual smell
Humidifier is new.
Take out water tank, open cover, let
it stay 12 hours in cool position.
Dirty water or water sitting
too long. Clean water tank, fill with clear
water.
Residual smell from diffusing
aroma oil on the aroma
cotton. Remove the aroma cotton, rinse it
under clean water and allow it to
dry.
Humidifier makes
a loud or unusual
sound
Resonant in water tank when
water is too low.
Fill water into water tank.
Humidifier is on an unstable
surface. Move the humidifier to a stable flat
surface.
Water tank is positioned
incorrectly.
Turn off and unplug the humidifier,
then align the water tank cover with
its respective opening in the inner
chamber.
Humidifier is malfunctioning.
Stop using the device immediately
and contact the Technical Support
Service of Cecotec.
The humidification
capacity is too low
There is natural or artificial
air replacement in the room
which interfere the increase
of %RH.
Check if doors and windows are
closed.
Check if there is no air conditioning
working in the room.
The air inlet grids and nozzle
could be blocked. Remove any blocking items from
the grids and the nozzle.
Too much scale in the water
basin.
Clean transducer.
The humidity selected rate is
too low.
Increase mist output speed.
Increase humidity setting rate.
Water is too dirty or water
kept too long in the tank. Clean water tank, change to fresh
clear water.
if it is supposed to be leaved unused for a long time.
Cleaning the transducer
Clean with clean water or citric acid if there is scale in it.
Brush off the scale from the surface.
Rinse the transducer with clean water.
Cleaning the humidifier basin
Clean the water basin with soft cloth or use citric acid if there is scale in it.
If there is scale covering the security switch, drop citric acid for 2-5 mins on the scale and
clean it out with the brush.
Rinse the water basin with clean water.
5. TROUBLESHOOTING
Trouble Possible cause Solution
The light indicator is
off when switched
on
The humidifier is not plugged
in. Plug the humidifier into a powered
electrical socket.
Power cord is damaged.
Stop using the device immediately
and contact the Technical Support
Service of Cecotec.
Humidifier is defective or
malfunctioning.
The light indicators
is on when switched
on, but no mist
comes out Humidifier is not turned on. Press the power button to turn it on.
The target humidity is
reached. Increase the target humidity or
change mode.
Water shortage
indicator is on
No water in the tank.
Refill the water tank and wait at
least 1 minute.
Water level is low.
The water level required
has not yet reached the
vaporisation compartment.
Wait at least 1 minute.
The water tank isn’t well
positioned. Check the positioning of tank on the
base.
The humidifier isn’t on a flat
surface. Check the positioning of the
humidifier.
The % RH of the room is over
90 %.
Wait until the % RH gets lower.