cecotec BREEZECARE 3000, Instruction Manual

Page: 21 / 24

BREEZECARE 3000 BREEZECARE 3000
39 38
ENGLISH ENGLISH
Water shortage
indicator is on
No water in the tank.
Refill the water tank and wait at
least 1 minute.
Water level is low.
The water level required
has not yet reached the
vaporisation compartment.
Wait at least 1 minute.
The water tank isn’t well
positioned. Check the positioning of tank on
the base.
The humidifier isn’t on a flat
surface. Check the positioning of the
humidifier.
The % RH of the room is over
90 %.
Wait until the % RH gets lower.
Humidifier produces
an unusual smell
Humidifier is new.
Take out water tank, open cover, let
it stay 12 hours in cool position.
Dirty water or water sitting
too long. Clean water tank, fill with clear
water.
Residual smell from diffusing
aroma oil on the aroma
cotton. Remove the aroma cotton, rinse it
under clean water and allow it to
dry.
Humidifier makes
a loud or unusual
sound
Resonant in water tank when
water is too low.
Fill water into water tank.
Humidifier is on an unstable
surface. Move the humidifier to a stable flat
surface.
Water tank is positioned
incorrectly.
Turn off and unplug the humidifier,
then align the water tank cover
with its respective opening in the
inner chamber.
Humidifier is malfunctioning.
Stop using the device immediately
and contact the Technical Support
Service of Cecotec.
The humidification
capacity is too low
There is natural or artificial
air replacement in the room
which interfere the increase
of %RH.
Check if doors and windows are
closed.
Check if there is no air conditioning
working in the room.
The air inlet grids and nozzle
could be blocked. Remove any blocking items from
the grids and the nozzle.
Too much scale in the water
basin.
Clean transducer.
The humidity selected rate is
too low.
Increase mist output speed.
Increase humidity setting rate.
Water is too dirty or water
kept too long in the tank. Clean water tank, change to fresh
clear water.
The ambient
humidity is too high
Humidifier is working in
Continuous mode.
Change the mode.
The humidity target is too
high.
Select a lower %RH target.
Room is not well-ventilated
Open a window to ensure proper
air flow for the humidifier or move
the humidifier to a better ventilated
room.
Excess water tank has spilled
while filling the water tank or
replacing the water tank back
onto the base.
Wipe off excess water from the
top and bottom of the base before
replacing the water tank.
There is
condensation in the
room
The room temperature is too
low.
Heat the room up.
The mist suddenly
stops coming out
Programmed timer period
has run out.
Turn humidifier on.
The water shortage indicator
is on.
Refill water tank.
The target humidity level is
reached.