cecotec Bolero Dresscode 2000 Autodosis, Instruction Manual, Page: 79 / 312

BOLERO DRESSCODE 2000 AUTODOSIS / BOLERO DRESSCODE 2000 AUTODOSIS SILVER
79
ENGLISH
"F03" Draining fault The washing machine is not drained. Stop the
programme.
Turn off the washing machine and disconnect it
from the power supply.
Check if:
-
The draining pipe is connected.
-
The draining pump filter is not blocked.
-
Important: Make sure the device has
completely cooled down before draining it.
-
The draining hose is frozen.
-
Plug the device again into a power supply.
-
Select and start the Spin programme or
hold down the On/Off icon for 3 seconds
and restart the desired programme.
-
If the error still appears, contact the
Cecotec Customer Service.
"F13" Door lock fault
-
The door lock does not work properly.
-
Start a programme 3 times to check if the
door is locked.
-
Open it and close it again.
-
Press the Start/Pause icon after fixing the
error. If the error still appears, contact the
Cecotec Customer Service.
"F14" Door unlock fault Door opening error
-
Press the Start/Pause icon.
-
The washing machine will try to open the
door.
-
The error will not disappear until you do
not unlock the door.
-
Or press the On/Off icon to restart the
washing machine and the error will
disappear.
"F24” Overflow or too
much foam. The water level reaches the overflow level.
-
Remove it by pressing the Start/Pause icon
and drain the water.
-
Select and start the desired programme.
-
If the error occurs again, disconnect the
appliance from the mains and contact the
Cecotec Customer Service.