cecotec 05554, Instruction Manual, Page: 25 / 33

4 9 4 8
ENGLISH ENGLISH
Use the up and down direction buttons to set the current time. Then, use the left and right
buttons to switch from hours to minutes and repeat the before step.
Fig.21.
(Рage 61)
Press the time button to save the settings.
Scheduling cleaning tasks
Long press the schedule button for 3 seconds. The first 2 digits, indicating the hour, will
start blinking.
Fig.22.
(Рage 61)
Use the up and down direction buttons to set the schedule time. Then, use the left and right
buttons to switch from hours to minutes and repeat the before step.
Fig.23.
(Рage 61)
Press the schedule button again to save the settings.
To cancel the scheduled cleaning, follow the below steps:
Set the clock on the remote control at 00:00 a.m. and save it.
Switch the robot off for 1 minute and switch it on again.
Note: The robot will beep to indicate all settings have been saved.
Warning: When the remote control’s batteries are replaced, the clock and schedule times
must be set again.
Light indicator:
Operating: Steady blue light.
Low power: Orange light blinks slowly.
Charging: Orange light oscillates.
Network configuration: Blue light.
Start-up/firmware update: Blue light oscillates.
Error: Red light flashes quickly.
6. MOBILE APP AND WI-FI CONNECTION
In order to access all the robot’s functions from wherever you are, it is suggested to
download the Conga 6090 App. You will be able to control the robot in the most efficient
way, enjoying the excellence of cleaning.
App advantages:
Control your robot in an easy and intuitive way.
Activate the cleaning process from any point.
Carry out settings and daily scheduling.
Choose between its different cleaning modes: Auto, Spiral, Edge, Manual, Twice, Restricted
area, Spot, Smart area, back home or Scrubbing.
View how the robot creates an interactive map as it is cleaning.
Manage rooms smartly through its Room Plan function, which allows you to join, separate
or name rooms. Plus, create and schedule your own cleaning plans by selecting the rooms
you want to clean, the mode and power level.
Check the cleaned surface and the time taken.
Check the cleaning history.
The App supports 5 GHz networks.
*This model is compatible with voice virtual assistants Google Assistant and Alexa
Configuration:
Fig.24.
(Рage 61)
Download the Conga 6090 App from App Store or Play Store.
Create an account with your e-mail and password.
Confirm login.
Add your Conga robot.
Connect to Wi-Fi.
Warnings:
The Wi-Fi name and password cannot exceed 32 bits.
If the network configuration fails to connect, follow the steps below:
Press the power button for 5 seconds, the robot will enter sleeping mode and the Wi-Fi light
indicator will blink fast indicating connection error. Retry connecting the robot again
following the steps in the before section.
If the connection fails again, check if:
a. The robot is too far away from the
router.
b. The Wi-Fi password is incorrect.
The following modes can be activated from the App:
Auto mode: Select this mode for the robot to clean 4x4 m quadrants. Within this space, it
will carry out a first cleaning cycle in Edge mode and then in zigzag motion to complete
the surface. Once it has finished, it will directly return to the charging base.
It can be activated from the App or the remote control.
Note: The robot could leave the room to complete the cleaning cycle in some of the
quadrants. This will not affect the robot’s operating, do not worry.
Edge mode: Select this mode for the robot to clean along walls and furniture.
It can be activated from the App or the remote control.
Spiral mode: When this mode is selected, the robot will start cleaning in a specific point, by
moving in an outward spiral motion and then returning to the starting point in an inward