48
47
ENGLISH
ENGLISH
Side effects and complications
Some users may experience pigmentation changes as a result of treatment with the IPL
hair removal device. These effects, if they occur, are generally mild and temporary. If you
experience any complication, please contact your physician immediately.
6
. CLEANING AND MAINTENANCE
Unplug the device from the power supply before cleaning it.
Clean the device after each use, especially the skin contact surface.
After cleaning, store it in its original box and keep it away from water.
Use a dry, clean cloth and a specially formulated cleaner for electronic equipment to gently
wipe the outer shell and the skin contact surface of the device.
Never immerse the device or any of its parts in water.
7.
TROUBLESHOOTING
My Bamba SkinCare IPL Quartz does not turn on.
Make sure that the power cord is plugged into the device socket properly.
Make sure that the adapter is plugged into power supply properly.
No flash is emitted when the flash button is pressed
Make sure that the green ready light is blinking.
Make sure that the device is in full contact with the skin. For your safety, the flash button will
only activate a flash if the skin contact surface is in full contact with the skin.
Check if the skin colour warning light blinks orange. If it does, the skin colour sensor has
stopped the emission of the flash. Your skin may be too dark for using the appliance.
Try using the device on a different part of your body.
If the ready light is on constantly together with any other lights, there is a system error. Turn
off the device and unplug it. Then, plug in the device and try to turn it on again. If the problem
persists, contact the Technical Support Service of Cecotec.
Check if the system warning light is on and all other lights are blinking. If so, unplug the
device. The device has reached the end of its life. Contact the Technical Support Service of
Cecotec.
8.
TECHNICAL SPECIFICATIONS
Product: Bamba SkinCare IPL Quartz
Product reference: 04245
Technology: Intense pulsed light
Flash duration: 500-800 usec
Wave length: 475-1200 nm
Power output: Max. 4j/cm
2
100-240 V; 50-60 hZ; 0.5 A
9.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old
appliances must be collected separately, in order to optimize the recovery
and recycling of the materials they contain and reduce the impact on
human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to
dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they
should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
10
. TECHNICAL SUPPORT AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years,
based on current legislation, except consumable parts. In the event of misuse, the warranty
will not apply.
If at any moment you detect any problem with your product or have any doubt, do not
hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
