AGUAZERO 8000 FULL BUILT-IN
95
94
ENGLISH
ENGLISH
Dishes are not
clean
You have not loaded them
correctly.
Read the “Preparing and loading the
dishes” section.
The programme is not
powerful enough.
Select a more intensive programme.
Not enough detergent has
been dispensed.
Use more detergent or change the
detergent.
There are items blocking the
spray arms movement.
Place the items again so the spray arm
can move freely.
The filtering set is not clean
or not correctly placed in the
bottom of the dishwasher.
This may block the spray
arms holes.
Clean and/or place the filter correctly.
Clean the spray arm holes.
Opaque glass
Combination of soft water
and too much detergent.
Use less detergent if you have soft
water and select a shorter cycle to
wash the items made of glass.
White spots
appear on plates
and glasses
Areas with hard water may
cause lime deposits.
Check the water softener settings or
the salt deposit filling.
Black or grey
marks on
tableware
Aluminium items have
brushed against the
tableware.
Use a mild abrasive cleaner to remove
these marks.
There is
detergent in the
dispenser
The dishes block the
detergent dispenser.
Load the dishes again correctly.
The dishes are
not dry.
Inadequate load.
Wear gloves if you find detergent
residues on the dishes to avoid skin
irritation.
You are removing the dishes
too fast.
Do not empty the dishwasher
immediately after the wash. Open the
door slightly to allow steam to escape.
Do not take the dishes out until the
interior temperature is safe to the
touch. Unload first the lower basket
to avoid water from dripping from the
upper basket.
You have selected an
inadequate programme.
With a short programme, the washing
temperature is lower, which decreases
the cleaning performance.
Choose a programme with longer
washing time.
Use of low-quality coated
cutlery.
The water draining is more difficult
with these items. The cutlery or
tableware of this kind cannot be
washed in the dishwasher.
Warning
Cecotec cannot be held responsible for unprofessional repair as this may cause serious risks
to the safety of the user of the appliance and affect the warranty.
Error codes
If there is a malfunction, the dishwasher will display an error code. The next table shows
possible error codes and their causes.
Codes
Problem
Possible causes
E1
The dishwasher needs more
time for the water to enter.
The taps are not open, or the
water inlet is limited, or the
water pressure is too low.
E3
The desired temperature is
not reached.
Heating element failure.
E4
Overflow.
Some element in the
dishwasher is leaking.
