DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER STEEL
67
66
ENGLISH
ENGLISH
Cleaning the door gaskets and glass
Wipe the glass and gaskets after each wash to remove lint and stains. If lint builds up it can
cause leaks.
Remove any coins, buttons and other objects from the gasket after each wash.
Fig. 26.
Cleaning the inlet filter
Warning
The inlet filter must be cleaned when there is little water.
Washing the filter in the tap
Fig. 27.
-
Close the water supply tap.
-
Remove the water supply hose from the tap.
-
Clean the filter edge.
-
Reconnect the water supply hose.
Washing the filter in the washing machine
Fig. 28
-
Loosen the water supply hose from the rear part of the device.
-
Pull out the filter with long nose pliers and reinstall it back after being washed.
-
Use a brush to clean the filter.
-
Connect the water supply hose again.
-
Note: if the brush is not clean, pull out the filter and wash it separately. Then, connect it
again and turn on the water supply.
Cleaning the detergent dispenser
-
Press down the arrow on the softener cover inside the dispenser drawer.
-
Lift the clip up and take out the softener cover and wash all grooves with water.
-
Place the softener cover again and push it gently to introduce it in the detergent dispenser
in place.
-
Pull out the dispenser drawer by pressing the A. Fig. 29.
-
Clean the dispenser drawer under running water. Fig. 30.
-
Clean inside the gap with an old toothbrush. Fig. 31.
-
Insert the dispenser drawer. Fig. 32.
Warning
Do not use alcohol, solvents or chemical products to clean the detergent dispenser.
- It is recommended the use of liquid detergent for washing programmes at low temperature.
You can vary the quantity of detergent according to the quantity of laundry and its soiling
level. Follow the detergent manufacturer recommendations for the quantity of detergent
you must use.
- Noise and remaining moisture level depend on the spin speed. The higher the spin speed,
the higher the noise and the lower the remaining moisture level.
- You can access the product database where the information for this model is stored by
scanning the QR code of the reference of your product (you will also find the energy label).
Model
Bolero DressCode
7200 Inverter
Bolero DressCode
7200 Inverter Steel
Bolero DressCode
8200 Inverter
Bolero DressCode
8200 Inverter Steel
Reference:
02317
02319
02322
02324
QR code
Model
Bolero
DressCode 9200
Inverter
Bolero DressCode
9200 Inverter Steel
Bolero DressCode
10200 Inverter
Bolero DressCode
10200 Inverter
Steel
Reference:
02327
02328
02332
02333
QR code
5. CLEANING AND MAINTENANCE
Warning
Before cleaning or repair tasks, unplug the appliance from the mains and close the water tap.
-
Proper maintenance of the washing machine can extend its working life. The surface can
be cleaned with diluted non-abrasive, neutral detergents if necessary. If there is any water
overflow, use a cloth to wipe it off immediately. Fig. 25
-
Do not use abrasive cleaners or scouring pads to clean the product.
Cleaning the drum
-
Rust inside the drum caused by metal objects must be cleaned immediately with chlorine-
free detergents.
-
Do not use steel wool.
Warning
Do not put laundry in the washing machine during the drum cleaning.
