26
ENGLISH
POWER INSTANT-CCINO 20 CHIC SERIE NERA/BIANCA
preference by turning the froth knob to the right for more froth and to the left for less froth.
Fig. 10.
Note: The amount of froth can be adjusted during the brewing cycle.
Press the macchiato/latte button once to brew a macchiato.
Press the macchiato/latte button twice to brew a latte.
To stop brewing coffee manually, press the button when the desired amount of coffee has
been brewed.
Hot milk/milk froth
Hold down the cappuccino button for 3 seconds to obtain hot milk or you want to add some
more milk froth to the previously prepared coffees.
To stop brewing milk manually, press the button when the desired amount of milk has been
poured into the cup.
Once you are done preparing your beverage with milk, store the unit’s milk tank directly in the
refrigerator (ready to be used for the next time) or dispose of the leftover milk.
Note: The amount of milk froth will vary depending on different factors, such as the type of
milk, the quantity, temperature, etc.
Auto-cleaning
Hold down the macchiato/latte button for 3 seconds (approx.) to activate the auto-cleaning
function.
Auto-off
The device will automatically enter standby mode after 15 minutes of no operation. Press any
of the buttons to start it again.
Descaling
Limescale deposits have an adverse effect not only on the quality of the espresso and the
water, but they also cause power losses and shorten the lifespan of the device.
Possible signs that indicate that descaling is required are a large amount of steam being
produced and slower brewing.
Note:
It is suggested to descale the device every 80 brew cycles when using filtered water, or every
40 brew cycles when using tap water.
After 500 cycles and with the milk tank in place, the appliance will remind the user to perform
descaling by lighting the Cappuccino and Latte indicators alternately. When this happens:
Fill the water tank with 600 ml of water and vinegar: 50 % of each.
Press the espresso and macchiato/latte buttons simultaneously. The 6 indicators will start
flashing slowly.
