Cecilware VENEZIA-17, User Manual, Page: 14 / 20

LA VENEZIA-17 ESPRESSO MACHINE USER MANUAL 13
PROBE SENSITIVITY
This menu sets the level sensor's sensitivity . By default, sensitivity is set at "Medium" and will not
normally require modification. However, it may be necessary to set the sensitivity to "High" if
using very pure water with very low dissolved salt levels (or to set it to "Low" in the opposite
case).
To modify the current option, press the
“ 1 Espresso ” (+) and “ 1 coffee” (-) buttons.
To accept the setting selected and move on to the next menu, press the “continuous” button.
SERVICE CYCLE
This menu sets the number of coffees dispensed per maintenance cycle (before replacing
shower plates, gaskets, etc.). When the dispensing counter reaches the number set (see fig.
26), the "Service" message will be displayed.
A “0000” value will not show any “Service”
message.
To edit the flashing number, press the “1 Espresso” (+) and “1 coffee” ( -) buttons.
To accept the setting selected and move on to the next menu, press the “continuous” button.
TEMPERATURE CONTROL
This menu activates the PID control of the temperature of the boiler. The default value is
enabled. Turning it to disabled will disconnect the heating element.
To accept the setting selected and move on to the next menu, press the “continuous” button.
TEMPERATURE UNIT (ºC - ºF)
This menu allows to modify the unit of the temperature shown on the LCD. You can choose
between ºC or ºF.
To edit the type of unit, press the “1 Espresso” (+) and “1 coffee” ( -) buttons.
To accept the setting selected and move on to the next menu, press the “continuous” button.