22
GB
Both LEDs will light up and the display will show:
Taking out the coffee
When the appliance is READY, to start grinding press the start button (7 Fig. 1) with the filter
holder and keep the filter holder in position until distribution is ended. During operation the
respective LED flashes and the message
WORKING
appears on the display.
Note:
Only in automatic operation, the display will also show the time remaining to complete
distribution.
At the end of distribution the appliance returns to its initial READY status, waiting to grind a new shot
the same as the last one set.
Note:
When the motor is running without grinding coffee beans, it may happen that a metallic noise
is heard coming from the spout. It is normal and it is due to the vibration of the inside flap,
and it will stop when starting grinding coffee beans.
4
Manual dose
READY
DISTRIBUTED SHOT COUNTERS
The coffee grinder has a
general counter
in which it stores the number of shots distributed since it
left the factory (this value cannot be reset) and a
partial counter
for the number of shots distributed
since it was last reset by the user. For each type of counter, a distinction is made between the
number of single and double shots.
Note:
Due to statistical tests on the product in the factory, some of the counters may be different
from zero.
Reading the counters
Press the button
. The display will show first the partial counter of the total shots (single shots
+ double shots + manual doses):
By pressing the button
or
you can also distinguish between the single or double shots
distributed since the last reset:
or
Note:
The value of the total shots may be different from the sum of the value of the single shots
plus double the value of the double shots, because it also allows for the shots distributed with
manual operation.
Sing. shots from
reset XXX
Doub. shots from
reset XXX
Total shots from
reset XXX
