3. Warranty and Safety Conditions
*
WARNING:
The electronics in the power supply system are designed for an indoor, clean environment.
When installed in a dusty and/or corrosive environment, outdoor or indoor, it is important to:
•
Install an appropriate filter on the enclosure door, or on the room’s air conditioning system. Installation of filters
may result in derating of module.
•
Keep the enclosure door closed during operation.
•
Replace the filters on a regular basis.
Important Safety Instructions and Save These Instructions.
3.1 Disclaimer
•
The manufacturer declines all responsibilities if equipment is not installed, used or operated according to the
instructions herein by skilled technicians according to local regulations.
•
Warranty does not apply if the product is not installed, used or handled according to the instructions in the
manual. Manufacturer may waive warranty if the system is not installed and commissioned by factory trained
technician.
3.2 Technical care
•
This electric equipment can only be repaired or maintained by a “qualified employee” with adequate training.
Even personnel who are in charge of simple repairs or maintenance are required to have knowledge or
experience related to electrical maintenance.
•
Please follow the procedures contained in this Manual, and note all the “DANGER”, “WARNING” AND “NOTICE”
marks contained in this Manual. Warning labels must not be removed.
•
Qualified employees are trained to recognize and avoid any dangers that might be present when working on or
near exposed electrical parts.
•
Qualified employees know how to lock out and tag out machines so the machines will not accidentally be turned
on and injure employees working on them.
•
Qualified employees are trained in OSHA and NFPA safety related work practices, and NFPA 70E Arc Flash
Protection and PPE requirements.
•
All operators are to be trained to perform the emergency shut-down procedure.
•
Never wear metallic objects such as rings, watches, or bracelets during installation, service and maintenance of
the product.
•
The maximum operating ambient temperature of the system is 40°C (104°F).
•
Insulated tools must be used at all times when working with live systems.
•
When handling the system/units pay attention to sharp edges.
•
This product is suitable for use in a computer room.
* These instructions are valid for most CE+T Products/Systems. Some points might however not be valid for the product
described in this manual
8
– Sierra 10 - 48/120 VAC – User Manual – v1.1
Warranty and Safety Conditions
Summary of Contents for Sierra 10 - 48/230
Page 67: ......
