11
network condition if the smart socket remains slow in action, or even
no action for a long time. Re-launch the App if nothing is improved.
8.2 Safety
Please read all of the safety before using:
1. The power of all connected devices combined shall not exceed the
rated power of the Wi-Fi Socket.
2. Make sure that the plug of the socket is fully connected to the
outlet so as to avoid any electric shock as well as to ensure stability
of the electrical devices connected to the socket.
3. Keep the Wi-Fi Socket away from places which are accessible to
children so as to avoid electric shock.
4. Avoid placing the Wi-Fi Socket in a humid environment; if
unavoidable, separation measures should be taken.
5. Should there be any foreign matters such as water or dust in the
socket of the Wi-Fi Socket, clean the socket before connecting.
6. Do not open the socket or attempt to repair or service it if not
authorized.
9 Warnings
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital devic
e, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable prot
ection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed a
nd used in accordance with the instructions, may cause harmful interference to radio commun
ications.
However, there is no guarantee that interference will not occur in a particular installation. If thi
s equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interf
erence received, including interference that may cause undesired operation.
