Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
4
Layout & Wiring
Erone - S2TR2641E2-E4-E2M
Erone SETR2641AM1, SETR2641AM2
Erone S3TR2641T1-T2-T4
Erone SETR2641TM
Erone S7TR2641E4
Erone FKT2641E1 - FKTHS2641E1
CDVI GALEOR
The receiver allocation is very important for the best
operation of the system. Place the receiver far from
interference sources such as big magnetic fields or radio
emissions. The installation and the positioning of the
antenna is very important as well. Before installing the
antenna it is advisable to make some tests on the site.
The distance between 2 antenna must be at least 0.7m.
Hereby, CDVI Wireless Spa, declares that the radio
equipment type SEL2641R433-XPL2P is in compliance
with directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.erone.com.
5
Compatible transmitters
6
Warnings
7
Display Legend
There are 2 methods available:
1) Using P1 and P2 throughout the menu
2) Remote from the receiver, using a transmitter already in the receivers
memory (Mode PLUS ).
P1 : enter the menu ( 4 sec.)
or
confirm the choice
P2 : navigate
the menu
8
Programming / Navigation menu
Button activated
TX Serial number
Relay activated
The factory value for the timing is
1 sec. Use P1 to scroll the digits
and P2 to confirm
Relay 1 : Pulse
Relay 1 : Step
Relay 1 : Timed
Menu
Timed
Add
: Add transmitters s/n
Delete TX
: Delete a single transmitter, the button of a transmitter, a transmitter
from a list , all transmitters Reset to factory default
Info relay
: Display relay operating mode, the number of Tx memorized, the of
Transmitters, the SW release.
Config relays
Set relay operating mode ( pulse , step, timed , On/Off)
Set delay time of each relay
Backup to
: data backup to an external memory
Restore from
: data restore from an external memory
Plus ON
: Enable remote transmitter memorization
Plus Limited
: Enable remote transmitter memorization only using a TX «master»
( see chapter 12 )
Plus OFF
: disable remote transmitter memorization
Connector for
backup memory
Backlit
LCD Display
Buzzer
www.erone.com - www.cdvigroup.com
Fig. 5
ERONE
XPL2P
Fig. 4
Antenna
RG58
P2
P1
NC
NO
C
R1
R2
Common
K2
K1
NC
NO
C
0
+12-24 Vac/dc