11
11
cdvigroup.com
EN
KCIN
Illuminated weatherproof Keypad with Remote Electronics
INSTALLATION MANUAL
3] PACKAGE CONTENTS
Mounting recommendations
Mount the keypad on a flat surface to avoid
any vandalism and to insure the best mounting.
Back EMF protection
To secure the system from back electromagnetic
fields do not forget to mount the varistor in parallel
on the lock terminal.
Remote
electronic
mounting
plate
Wire
sealed cap
Varistor
Diax
®
screws
(M5x35)
Diax
®
Plastic
anchor
Screw
(M4x30)
Brass
anchor
Remote
electronic
1
2
-
-
-
2
2
-
KCIN
-
-
1
2
1
2
2
2
3
4] MOUNTING INSTRUCTIONS
make sure that you have all the appropriate tools (drill, screw drivers and a meter tape...)
and follow the mounting instructions of for the KCIN keypad and for the remote electronic.
Verify the distance between the KCIN
keypad and its remote electronic
(refer to page 3 ´Notes and
Recommendations). Place the back
plate of the KCIN on the wall and the
bracket of the remote electronic then
mark with a pen the hole location
then drill the 2 mounting holes (drill
bit Ø 5 mm and 35 MM hole depth)
and the hole wiring access.
Insert the 2 plastic anchors in the
holes. Place the back plate of the
KCIN and screw on the wall using
the supplied (M4x30) mounting
screws.
Mount the KCIN keypad
on the wall with the M5x35
DIAX
®
screws.
1
2
