CDVI CDV96KP, User Manual

Page: 17 / 24

-15-
Input the master code.
(Default: [ ]+[#] )
Beep+, Beep
Beep+, Beep Beep+, Beep Beep+, Beep Beep+, Beep
Beep+ Beep+ Beep+ Beep
18+# 19+#
21+# 60+#
2011+# 1006+# 2010+# 2012+#
The color of key indicator
-
Beep, Beep+
*
(The color
of standby)
The color of
key indicator
for relay2
(blue-white)
(green) (green) (green) (green)
(green blue-white) (green blue-white) (green blue-white) (green blue-white)
15.Temporary
Code
(Single Use only)
Password for relay1
16.Temporary
Code
(Singl
e
Use only)
Password
Enter
the setting code.
Enter
the setting code.
Enter
the setting
code
(
ex.:21)
20~59 60~99
17.Setting the code
for user group1
Locations 20 to 59
18.Setting the code
for user group2
Locations 60 to 99
Enter
the setting code.
(ex.:60)
Enter the code req
(ex.: 1006)
1~12 digits
Enter the code req
(ex.: 2011)
1~12 digits
I
Enter the code req
(ex.: 2011)
1~12 digits
Enter the code req
(ex.: 2012)
1~12 digits
- The user code group 1 is used to release the first lock and the user
codegroup 2 is used to release the second lock (the second lock
requires
external device
CDV-RLC
to support
this function
).
- If the password length exceeds 12 digits, the system will
emit 4
beeps eg.
“beep,beep,beep,beep”,and the digitals you input before will
be cleared at the same time.
- The user code can not be set the same as the master code and
temporary code.
The colo
u
r of key indicator The colo
u
r of key indicator The colo
u
r of key indicator The colo
u
r of key indicator
The colo
u
r of key indicator The colo
u
r of key indicator The colo
u
r of key indicator The colo
u
r of key indicator
- When the correct temporary password
has been used
to release
the door the system will clear the temporary password after 60
seconds.
T
he password
is still
valid
for
60 seconds after
enteri
ng the
correct temporary password
- Temporary 1 is used to release the first lock and temporary 2 is
used to release the second lock (the second lock
requires
external
device
, CDV-RLC,
to support
this function
).
- If the password length exceeds 12 digits, the system will
emit 4
beeps eg.
“beep,beep,beep,beep”and the digit
s entered
beforewill
be cleared at the same time.
- The temporary code can not be set the same as the master code
and user code.
When the “ cancel” key is pressed, the indicator will show its standby colo
u
r, the buzzer beeps, and the
system exits the setting mode.
- When there isn’t any operation in 10s, the indicator will show its standby colo
u
r, the buzzer beeps, and the
system exits the setting mode.
- When
a
setting
input
fail
s
, the colo
u
r of key indicator will turn red
and
the buzzer
will
beep
.