w w w . c d v g r o u p . c o m
Installation Manual
w w w . c d v g r o u p . c o m
Wiegand Proximity Readers
• Indoor / outdoor application
• Selectable Wiegand output, 26, 30 or 44-bits
• LED and built-in buzzer (internal or external mode)
• Potted electronics
• Input voltage: 12V DC
• Consumption: 100mA
RECOMMENDATIONS:
CONTENTS:
Recommended cables
4 twisted pairs 0.6 MM.
Suggested power supplies
These power supplies are
recommended with these Wiegand
readers:
- ARD12
- BS60
Optional
Single gang box mounting plate
for the DGLP FN WLC reader
(Ref: MPLATE).
Important
To protect the device from back - emf
do not forget to mount the varistor on
the lock in parallel.
Environment
If the readers are mounted in a
humid area or close to a sea shore,
we recommend applying a varnish
on the connections of the cable to
avoid oxidation.
Varistor
Diax®
security
tool
Diax®
security
screw
Brass
anchor
Right
cover
Left
cover
Plastic
anchor
Wood
screw
3 x 40
mm
DGLI WLC &
DGLI F WLC
1
1
2
2
-
-
-
-
DGLP WLC &
DGLP F WLC
1
-
-
-
2
2
2
2
FEATURES:
Measure and mark the center lines to
determine the reader position. Drill the fixing
screw holes (Diametre: 4MM for the mounting
plate and 6MM for the reader). Drill the wiring
access area.
DGLI WLC
Insert the brass anchors in the mounting
holes, connect the cable to the terminal block,
then fasten the reader with the DIAX® screws
using the DIAX® spanner. Make sure that the
varistor is connected on the lock (refer to page
2 «Recommendations»).
DGLP WLC
Insert the plastic anchors in the mounting
holes, connect the cable to the terminal block,
Then fasten the reader with the wooden
screws Leave an area to access the cable
to make the wiring). Put the covers on top
of the reader. Make sure that the varistor
is connected on the lock (refer to page 2
«Recommendations»).
MOUNTING INSTRUCTIONS:
1
2
3
Ref : DGLP WLC and DGLI WLC
